Индикация Unifi LED status цветовое обозначение состояния | Ubiquiti форум UBNT: инструкции, настройка

Индикация Unifi LED status цветовое обозначение состояния

Kadabifd

участник
11 Сен 2017
1
1
5
37
Was this useful? Help us identify your favorite articles by clicking on the thumbs up at the bottom of the page. And if you think this article is not useful, please let us know why by clicking on the feedback link below!

Access Points, Security Gateways, Switches and Cloud Keys
Back to Top

Starting with Gen2 UAPs, we moved on to the Blue and White LED. USGs, UniFi Switches and Cloud Keys also use the same Blue and White LED patterns showcased in the table below, and they will mean the same thing. Legacy UAPs will have an Amber and Green LED on the front of the unit as seen in the Legacy section. Some products don't feature status LED patterns, such as the PoE Adapters.

Back to Top

White and Blue LEDs apply to:

Access Points UAP-PRO, UAP-Outdoor+, UAP-AC, UAP-AC-OD, UAP-IW, UAP-AC-LITE, UAP-AC-LR, UAP-AC-PRO, UAP-AC-HD, UAP-AC-EDU
Routing & Switching Cloud Key: UC-CK
Security Gateways: USG, USG-PRO-4
Switches: US‑24‑250W, US‑24‑500W, US‑48‑500W, US‑48‑750W, US‑24, US‑48, US‑8, US‑8‑60W, US‑8‑150W, US‑16‑150W, US‑16‑XG
Device Activity
LED Pattern

Initializing

AP is Booting



Flashing White / Off Every 1/2s

Factory Defaults

AP is Awaiting Adoption



Steady White

Adopted

AP is Broadcasting SSIDs;
Normal Operating Mode



Steady Blue

Initialization Error A12

Power Cycle AP and Contact Support if Recurring



Strobing White / Off

Firmware Upgrade

AP is Busy with Upgrade
DO NOT INTERRUPT!



Quickly Flashing White / Blue

Isolated

AP Lost Network Connectivity,
Searching for Wireless Uplink



Blue and Flashing Off Every 5s

Locating

The AP Locate Feature was Activated in Controller or the UniFi AC EasySetup App



Rapid Flashing Blue / Off

Device Offline

Verify Power, POE and Ethernet Cable



LED Off

Legacy Amber and Green LED

Back to Top

Applies to: UAP, UAP-LR, UAP-Outdoor5.

Device Activity
LED Pattern

Initializing

AP is Booting



Flashing Amber / Off Every 1/2s

Factory Defaults

AP is Awaiting Adoption



Steady Amber

Adopted

AP is Broadcasting SSIDs;
Normal Operating Mode



Steady Green

Initialization Error A12

Power Cycle AP and Contact Support if Recurring



Strobing Amber / Off

Firmware Upgrade

AP is Busy with Upgrade
DO NOT INTERRUPT!



Quickly Flashing Amber / Green

Isolated

AP Lost Network Connectivity,
Searching for Wireless Uplink



Green and Flashing Off Every 5s

Locating

The AP Locate Feature was Activated in Controller or the UniFi AC EasySetup App



Rapid Flashing Green / Off

Device Offline

Verify Power, POE and Ethernet Cable



LED Off

Back to Top

The various UniFi Security Gateways and UniFi Switches will have a different type, number and location of ports, please be sure to reference your specific model's Quick Start Guide (pages ~5-6, under the Hardware Overview section) for the exact location and description of its ports.

Console Port's right LED (in the applicable devices):

  • LED Off: Power Off
  • LED Green: Power On
Speed/Link/Act (right LED ports other than Console):

  • LED Off: No Link
  • LED Amber: Link Established at 10/100 Mbps
  • LED Flashing Amber: Link Activity at 10/100 Mbps
  • LED Green: Link Established at 1000 Mbps
  • LED Flashing Green: Link Activity at 1000 Mbps
PoE (left LED on ports of applicable devices):

  • LED Off: No PoE
  • LED Amber: IEEE 802.3af/802.3at
  • LED Green: 24V Passive
SFP (in the applicable devices):

  • LED Off: No Link
  • LED Green: Link Established at 1 Gbps
  • LED Flashing Green: Link activity at 1 Gbps
See specific port LED information in the Hardware Overview section (between pages 5 and 6) of the Quickstart Guides. You can find the QSG at the bottom of each product page of the USGs and Switches in the Routing & Switching section of the UniFi Product page.

Back to Top

The LED of the PoE Adapters are simple to interpret:

LED is Off - PoE is Off

LED is On and steady - PoE is functioning as it should

LED is blinking - this is not a configured state, this just might mean the device is not connected properly, or that something is wrong with the cable.